Option

Description

Box deduction offsets - Left and Right

Enter the left and right offsets between which the box should be deducted. Offsets to the left of the centreline should be entered as negative values. Only available if entering details by offset.

Box deduction point codes - Left and Right

Enter the left and right PLCs between which the box should be deducted. Codes can be values from 1 to 99. Points to the left of the centreline should be entered as negative values. Only available if entering details by point codes.

You can also select the most used point codes from the descriptors in the list.

For instance, the following settings will use the left and right shoulder breakpoints for the deduction.

Box depth to deduct

Enter the depth that should be deducted from the cross-section to form the box.

Try to intersect with batters - Left and Right

Select these options to have the routine try to intercept with the batter slopes on the respective sides. If an intersection cannot be calculated, that side will be taken vertically to an intersection with the original cross-section.

Include points outside box

Select this option to have points falling outside the box copied from the original cross-section to the new cross-section.

Back button

Click to go back to the Process Details.

Finish button

Click to accept the current entries.

Cancel Button

Click to cancel the function.