Translate

Insert existing cross-sections back into the model as points.

Icon

Command

Shortcut Key

Toolbar

 

RD_TRANSLATETODTM

 

 

This function allows you to convert the road model surface into a surface (YXZ points plus lines) in the DTM model.

Procedure

The procedure differs depending on whether the selected road is a cross-section based model, or a strings based model.

Cross-Section Based Road Model

The cross-sections must exist in a road database, and a horizontal alignment must have been coordinated.

The layer from which the cross-sections in the roads file are extracted, and the terrain surface into which the generated points are added, is selected. A suffix can optionally be entered to add to the names of the points generated. By default, all the points on the cross-sections are translated to YXZ coordinates. If the Batters Only check box is selected, only the first two points on the left and the last two points on the right of the cross-section are translated (in other words, only the banks).

The generated points are automatically named, to enable the points to be connected by lines using a suitable name filter in the Intelli-Lines function. The naming convention is as follows:

The "x" suffix on all the points indicates that they come from cross-sections, and would enable a mass deletion at a later stage if necessary. An Intelli-Line name filter that connected all the "l1" points would pick up the left edge of the road, a filter that connected all the "bb" points would pick up all the bottom of banks (both left and right), and so on.

  1. The Cross-section Translate options display.

  1. Fill in the relevant data and click OK.

  2. The following displays in the Output bar.

Strings Based Model

This function is used to convert the road strings model into DTM points in the Terrain model. A DTM point is created for each string vertex and automatically connected with break lines, according to the string hierarchy, to form a DTM surface of the road. This road DTM model then merges into the specified destination DTM surface.

So, if you have a DTM of the natural ground and a road strings model, you can create a merged DTM surface containing the roads model.

  1. The Translate Road String model to DTM options display.

  1. Select the DTM surface to translate the roads model to, as well as if you want to include the entire road section from left toe to right toe or just the carriageway portion.

  2. Click Translate All to translate all the visible roads, or Translate Current to translate the current road only.

  3. The road section is used to create a surface model in the DTM.